Frequency Range (-10 dB)   -   41Hz to 18kHz

Frequency Response (+/-3 dB)   -   49Hz to 16kHz

Coverage Pattern   -   90 deg. x 50 deg.

Directivity Factor (Q)   -   10.5

Directivity Index (DI)   -   10.2 dB

Crossover Modes   -   Tri-amp/Bi-amp (passive mid-high) switchable

Passive Crossover   -   6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz

Transducer Power Ratings (AES)   -   LF: 1600 W (6400 W peak), 2 hrs. 1200 W (4800 W peak), 100 hrs
                                                       MF: 350 W (1400 W peak), 100 hrs
                                                       HF: 75 W (300 W peak), 2 hrs

Long-Term System Power Rating (IEC)   -   Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)
                                                              M/HF: 300 W (1200 W peak), 100 hrs

Maximum SPL   -   Tri-amp mode:
                            LF: 128 dB-SPL cont avg (134 dB peak)
                            MF: 135 dB-SPL cont avg (143 dB peak)
                            HF: 134 dB-SPL cont avg (140 dB peak)
                            Passive mode: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W at 1m)   -   Passive Mode: 109 dB-SPL (mid/high section only)

Low Frequency Driver   -   2x 2206H 300mm / 11.81" driver with 100mm / 4") voice coil

Mid Frequency Driver   -   CMCD-82H cone midrange compression driver with integral 200 mm (8") diameter Differential Drive dual 75mm / 2.95" voice coil driver

High Frequency Driver   -   2432H, 38 mm / 1.5" exit compression driver with 75 mm (3") voice coil

Transducers: Nominal Impedance   -   Low Frequency Driver: 4 ohms (2x 8 ohms, internally wired in parallel)
                                                       Mid Frequency Driver: 8 ohms
                                                       High Frequency Driver: 8 ohms

Transducers: Sensitivity   -   Low Frequency Driver: 96 dB-SPL (1W, 1m within operational band)
                                         Mid Frequency Driver: 109 dB-SPL 6 (1W, 1m)
                                         High Frequency Driver: 114 dB-SPL (1W at 1m)

Transducers: Waveguides   -   MF: PT-N95MF 24 x 24" / 609.60 x 609.60mm
                                            HF: PT-H95HF 12 x 12" / 304.80 x 304.80mm

Enclosure   -   Trapezoidal with 15 degree side angles, 16mm / 0.63" exterior grade 11-ply Finnish birch plywood

Suspension Attachment   -   20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard- ware (eyebolts Not included)

Weather Resistant   -   WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements

Grille   -   Powder coated 14 gauge perforated steel, acoustically transparent foam backing (grille cloth backing on white units)

Input Connectors   -   Neutrik Speakon NL4, plus CE-compliant covered barrier strip termi- nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375") spade lugs. Speakon in parallel with barrier strip for loop-through

Environmental Specifications   -   Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX

Applications   -   Performing arts facilities / Live theaters
                         Auditoriums / Houses of worship
                         Dance clubs / Sports facilities

Dimensions (H x W x D)   -   39.0 x 26.5 x 27.8" / 99.06 x 67.31 x 70.61cm (in vertical orientation)

Weight   -   170lbs / 77.11kg