Frequency Range 1 (-10 dB)   -   200 Hz to 18 kHz

Frequency Response 1 (+/-3 dB)   -   240 Hz to 16 kHz

Coverage Pattern    -   60 x 60 deg.

Directivity Factor (Q)   -   22.4

Directivity Index (DI)   -   13.5dB

Crossover Modes   -   Bi-amp/Passive switchable

Passive Crossover   -   1.75kHz

Transducer Power Ratings (AES)   -   MF: 350 W (1200 W peak), 100 hrs
                                                       HF: 75 W (300W Peak), 2 Hours

Long-Term System Power Rating (IEC)   -   Passive Mode: 300 W (1200 W peak), 100 hrs

Maximum SPL   -   Bi-amp mode:
                            MF: 135dB SPL cont avg (141dB peak)
                            HF: 135dB SPL cont avg (141dB peak)

                            Passive Mode: 135dB SPL cont avg (141dB peak)

System Sensitivity (1W at 1m)   -   Passive Mode: 110 dB SPL

Mid Frequency Driver   -   CMCD-82H cone mid-range compression driver with integral 200 mm (8 in) diameter Neodymium Differential Drive NDD dual voice coil driver

High Frequency Driver   -   2432H, 1.5" / 38.10mm exit compression driver with 3" / 76.20mm voice coil

Transducer: Nominal Impedance   -   Mid Frequency Driver: 8Ohms
                                                      High Frequency Driver: 8Ohms

Transducer: Sensitivity   -   Mid Frequency Driver (1W, 1m within operational Band): 110dB - SPL
                                        High Frequency Driver (1W at 1m):116dB - SPL

Transducer: Waveguides   -   MF: PT-N66MF 24 x 24" / 609.60 x 609.60mm
                                           HF: PT-H66HF 12 x 12" / 304.80 x 304.80mm

Enclosure   -   Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment   -   20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware (eyebolts NOT included)

Weather Resistant Versions   -   WRX for direct exposure or extreme environments, such as tropical or beach or in areas with salt air, extreme high humidity or rapid changes in temperature.

Grille   -   Powder coated 14 gauge perforated steel, acoustically transparent foam backing (grille cloth backing on white units)

Input Connectors   -   Neutrik Speakon NL4, plus CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 0.375" / 9.53mm spade lugs. Speakon in parallel with barrier strip for loop-through

Environmental Specifications   -   Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC or WRX

Applications   -   Performing arts facilities
                         Live theaters
                         Auditoriums
                         Houses of worship
                         Dance clubs
                         Sports facilities

Dimensions (H x W x D)   -   39.0 x 26.5 x 27.8" / 990.60 x 673.10 x 706.12mm

Weight   -   130lbs / 58.97kg