Specifications

• Frequency Range (-10 dB): 38 Hz - 20 kHz
• Frequency Response (+/-3 dB): 45 Hz - 18 kHz
• Coverage Pattern: 90x 50, rotatable waveguide
• Directivity Factor (Q): 11
• Directivity Index (DI): 10.5 dB
• Crossover Modes: Tri-amp/Bi-amp switchable
• Crossover Frequencies: 300 Hz and 2.2 kHz
• Transducer Power Rating (AES): LF: 1000 W (4000 W peak), 2 hrs
• 750 W (3000 W peak), 100 hrs
• MF: 350 W (1400 W peak), 2 hrs
• HF: 100 W (400 W peak), 2 hrs
• Long-Term System Power Rating (IEC): LF: 600 W (2400 W peak), 100 hrs
• MF/HF: 200 W (800 W peak), 100 hrs
• Maximum SPL: LF: 127 dB-SPL cont avg (133 dB peak)
• Tri-amp mode:
• MF: 133 dB-SPL cont avg (139 dB peak)
• HF: 133 dB-SPL cont avg (139 dB peak)
• Bi-amp mode:
• MF/HF: 133 dB-SPL cont avg (139 dB peak)
• System Sensitivity of Passive
• Sections (1W @ 1m): MF/HF Section in Bi-amp mode: 108 dB SPL
• Nominal Impedance: 8 ohms
• Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in ) Differential Drive driver with 75 mm (3 in) dual voice coil
• Sensitivity (1W @ 1m)
• (Low Frequency): 97 dB SPL
• Midrange Driver: JBL CMCD-82H Cone Midrange Compression
• Driver with integral 200 mm (8 in) diameter
• Differential Drive dual voice coil internal driver
• Sensitivity (1W @ 1m)
• (Midrange): 108 dB SPL
• High Frequency Driver: JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
• Sensitivity (1W @ 1m)
• (High Frequency): 113 dB SPL
• Waveguide: PT-K95MH
• Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
• Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
• Finish: Black DuraFlex finish. White available upon request.
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
• Input Connector: NL8 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
• Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
• Dimensions (H x W x D in vertical cabinet orientation): 967 x 561 x 657 mm
• (38.1 x 22.1 x 25.9 in)
• Net Weight: 45.8 kg (101 lb)
• Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.