Frequency Range (-10 dB)   -   80Hz to 18kHz

Frequency Response (+/-3 dB)   -   90Hz to 16kHz

Coverage Pattern   -   40 deg. x 30 deg.

Directivity Factor (Q)   -   24.1

Directivity Index (DI)   -   16.0dB

Crossover Modes   -   Bi-amp/Passive switchable

Passive Crossover   -   6th order (36 dB/oct) Linkwitz-Riley HP & LP, 850 Hz

Transducer Power Ratings (AES)   -   LF: 400W (1600 W peak), 2 hrs. 300W (1200 W peak), 100 hrs
                                                       HF: 75W (300 W peak), 2 hrs

Long-Term System Power Rating (IEC)   -   Passive Mode: 300 W (1200 W peak), 100 hrs

Maximum SPL   -   Bi-amp Mode:
                            LF: 137 dB-SPL cont avg (143 dB peak)
                            HF: 135 dB-SPL cont avg (141 dB peak)
                            Passive Mode: 134 dB SPL cont avg (140 dB peak)

System Sensitivity (1W at 1m)   -   Passive Mode: 109 dB-SPL

Low Frequency Driver   -   M222-8A: 300mm / 11.81" driver with 75mm / 2.95" voice coil

High Frequency Driver   -   2453H, 38mm / 1.50" exit compression driver with 100 mm (4 in) voice coil

Transducers: Nominal Impedance   -   Low Frequency Driver: 8Ohms
                                                       High Frequency Driver: 8Ohms

Transducers: Sensitivity   -    Low Frequency Driver: 111 dB-SPL (1W, 1m within operational band)
                                          High Frequency Driver: 116 dB-SPL (1W at 1m)

Transducers: Waveguides   -   LF: PT-N43MF 24 x 24" / 609.60 x 609.60mm
                                            HF: PT-H43HF 12 x 12" / 304.80 x 304.80mm

Enclosure   -   Trapezoidal with 12.5 degree side angles, 16mm / 0.63" exterior grade 11-ply Finnish birch plywood

Suspension Attachment   -   20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hard- ware (eyebolts Not included)

Weather Resistant   -   WRC for outdoor placement where the loudspeaker will be sheltered from direct exposure to the elements

Grille   -   Powder coated 14 gauge perforated steel, acoustically transparent foam backing (grille cloth backing on white units)

Input Connectors   -   Neutrik Speakon NL4, plus CE-compliant covered barrier strip termi- nals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through

Environmental Specifications   -   Mil-Std 810; IP-x3 per IEC529

Applications   -   Performing arts facilities
                         Live theaters
                         Auditoriums
                         Houses of worship
                         Dance clubs
                         Sports facilities

Dimensions (H x W x D)   -   39.0 x 26.5 x 35.3" / 99.06 x 67.31 x 89.66cm (in vertical orientation)

Weight   -   175lbs / 79.38kg