| Load Ratings |
| |
Dimmer Channels |
6 |
| |
Maximum Per Channel |
800 Watts/VA (3.5 Amps @ 230 Volts AC) |
| |
Minimum Per Channel |
25 Watts/VA (0.108 Amps @ 230 Volts AC) |
| |
Module Total |
2200 Watts/VA (10 Amps @ 220 Volts AC);
2300 Watts/VA (10 Amps @ 230 Volts AC);
2400 Watts/VA (10 Amps @ 240 Volts AC) |
| |
Load Types |
LED[1], Incandescent, Magnetic Low-voltage, Neon/Cold Cathode, 2-Wire Dimmable Fluorescent, & Non-Dim Lighting (also: Electronic Low-voltage, 3- and 4-Wire Fluorescent, High-Inrush Switching, & 277V via CLS-EXP Series expansion modules) |
| Power Requirements |
| |
220 to 240 Volts AC, 50/60Hz line power |
| Connections |
| |
LOCAL DEVICES |
(1) 4-pin 5mm detachable terminal block;
Cresnet® Master port for local devices including:
- C2N-DB and CNX-B Series keypads, 16 maximum;
- C2N-SSC-2 and C2N-SDC-DC shade controllers; 16 maximum;
- Additional CLSI-C6 or CLSI-C6M units, 8 maximum;
- Additional CNPWSI-75 or other Cresnet power supply required beyond 4 devices; C2N-SDC-DC always requires an additional power supply
|
| |
CONTROL SYSTEM |
(1) 4-pin 5mm detachable terminal block;
Cresnet Slave port for connection to a control system |
| |
HOT |
(1) Captive screw terminal[3], line power input |
| |
LOAD1 – LOAD6 |
(6) Captive screw terminals[3], dimmer channel outputs 1 – 6 |
| |
NEUTRAL |
(1) Captive screw terminal[3] |
| |
GROUND |
(1) Captive screw terminal[3] |
| |
PC (front) |
(1) 3.5mm TRS mini-phone jack, RS-232 Programming port |
| Controls |
| |
Buttons 1 – 6 |
(6) 3-position rocker pushbuttons; configurable to recall (or toggle recall/off) individual scenes, control shades, or for master lighting or shade control; “scene mastering” option enables manual dimming utilizing rocker button action; also used to adjust lighting levels when in “Lighting” mode and shade positions when in “Shades” mode; additional functionality configurable via software |
| |
Up/Down Button |
(1) 3-position rocker pushbutton; configurable for master lighting or shade control, or as a “shift” for Buttons 1-6; additional functionality configurable via software |
| |
ON |
(1) pushbutton, recalls “On” scene |
| |
OFF |
(1) pushbutton, turns all lights off |
| |
LIGHTS, SHADES |
(2) Pushbuttons, select “Lights” or “Shades” modes |
| |
SAVE, CANCEL, ∧, ∨ |
(4) Pushbuttons, navigate and execute setup functions |
| |
Reset |
Recessed miniature pushbutton for hardware reset |
| |
Dimming Ramp Rate |
5 seconds (default), software adjustable 1 to 10 seconds |
| |
Scene Fade Time |
2 seconds (default), software adjustable 0 seconds to 99 minutes |
| LED Indicators |
| |
Scenes |
(6-white) Correspond with each “Scene” Button |
| |
High/Low |
(2-white) Indicate “Shift” status |
| |
ON |
(1-white) Indicates “On” Scene is selected |
| |
LIGHTS, SHADES |
(2-green) Indicates “Lights” or “Shades” mode is active |
| |
SAVE, CANCEL |
(2-green) Correspond with “Save” and “Cancel” Buttons |
| |
MIN, SEC |
(2-green) Indicates display of “Minutes” or “Seconds” |
| |
1 – 6 |
(6-green) 7-Segment bargraphs, indicate lighting levels and shade positions |
| |
Numeric Display |
(2-green) 8-Segment digits, indicates modes and setup values |
| IR Receiver |
| |
Reception Frequency |
36 kHz |
| |
Requires CLS-IRHT8 IR remote, sold separately |
| Environmental |
| |
Temperature |
32° to 104°F (0° to 40°C) |
| |
Humidity |
10% to 90% RH (non-condensing) |
| Enclosure |
| |
Mounts in a 4-gang electrical box, 3-1/2" (89 mm) deep minimum |
| Dimensions |
| |
Height |
4.48 in (114 mm) |
| |
Width |
8.89 in (226 mm) |
| |
Depth |
2.47 in (63 mm) |
| Weight |
| |
1.43 lb (649 g) |
