FEATURES
- Weather-Resistant, All Fiberglass Enclosure
- EN54-24 Compliant
- 90° x 50° Coverage
- 2265H Differential Drive® Low-Frequency Driver
- 2432H High Frequency Compression Drive
- Large PT™ Progressive Transition waveguide for excellent pattern control and low distortion
- Rotatable wave guide for vertical or horizontal orientation
- Available in Gray and Black finish
- 400 W, 70/100V Transformer Included
- U-type Mounting Bracket Included
SPECIFICATIONS
- Frequency Range (-10 dB) 41 Hz – 20 kHz
- Frequency Response (±3 dB): 88 Hz – 19 kHz
- Coverage Pattern 90° x 50°, rotatable waveguide
- Coverage Angle 500 Hz 1000 Hz 2000 Hz 4000 Hz Horizontal 136° 127° 96° 99° Vertical 106° 87° 64° 40°
- Directivity Factor (Q) 12.6
- Directivity Index (DI) 11 dB
- Crossover Frequency 1.2 kHz
- Long-Term System Power Rating (IEC) 400 W (1600 W peak), 100 hrs
- Maximum SPL 127 dB-SPL cont avg (133 dB peak)
- Maximum SPL (@ 4m) 113.34 dB
- System Sensitivity (1W @ 1m) 100 dB SPL
- Sensitivity (1W @ 4m) 88.43 dB SPL
- 70V / 100V Transformer Taps 70V: 400 W, 200 W, 100W 100V: 400W, 200W
- Low Frequency Driver 1 x JBL 2265H 380 mm (15 in.) Differential Drive® driver with 75 mm (3 in) dual voice coil
- Nominal Impedance 8 ohms
- Sensitivity (1W @ 1m, within operational band) 98 dB SPL
- High Frequency Driver JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil
- Nominal Impedance 8 ohms
- Sensitivity (1W @ 1m) 113 dB SPL
- Waveguide PT-H95HF -1
- Enclosure Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available in black (-BK)
- Suspension Attachment 2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety.
- Grille Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh
- Input Connector CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs.
- Environmental Specifications IP55C per IEC 529
- Dimensions (H x W x D in horizontal cabinet orientation) 485 x 810 x 478 mm (19.1 x 31.9 x 18.8 in)
- Net Weight 28.3 kg (62.5 lb)
