| Frequency Range (-10 dB) |
41 Hz – 20 kHz |
| |
Frequency Response (±3 dB): |
88 Hz – 19 kHz |
| |
Coverage Pattern |
90° x 50°, rotatable waveguide |
| |
Coverage Angle
Horizontal
Vertical |
500 Hz 1000 Hz 2000 Hz 4000 Hz
136° 127° 96° 99°
106° 87° 64° 40° |
| |
Directivity Factor (Q) |
12.6 |
| |
Directivity Index (DI) |
11 dB |
| |
Crossover Frequency |
1.2 kHz |
| |
Long-Term System Power Rating (IEC) |
400 W (1600 W peak), 100 hrs |
| |
Maximum SPL |
127 dB-SPL cont avg (133 dB peak) |
| |
Maximum SPL (@ 4m) |
113.34 dB |
| |
System Sensitivity (1W @ 1m) |
100 dB SPL |
| |
Sensitivity (1W @ 4m) |
88.43 dB SPL |
| |
70V / 100V Transformer Taps |
70V: 400 W, 200 W, 100W
100V: 400W, 200W |
| |
Low Frequency Driver |
1 x JBL 2265H 380 mm (15 in.) Differential Drive® driver with 75 mm (3 in) dual voice coil |
| |
Nominal Impedance |
8 ohms |
| |
Sensitivity (1W @ 1m, within operational band) |
98 dB SPL |
| |
High Frequency Driver |
JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil |
| |
Nominal Impedance |
8 ohms |
| |
Sensitivity (1W @ 1m) |
113 dB SPL |
| |
Waveguide |
PT-H95HF -1 |
| |
Enclosure |
Hand-Laminated Fiberglass, gray gelcoat (similar to Pantone 420C), available
in black (-BK) |
| |
Suspension Attachment |
2 x M10 for Included U-Bracket, 2 x M6 for aiming stabilization, 1 x M10 on rear for safety. |
| |
Grille |
Three layer grille assemblies consisting of 16-gauge powder coated stainless steel, backed with open cell foam and stainless steel mesh |
| |
Input Connector |
CE-compliant covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. |
| |
Environmental Specifications |
IP55C per IEC 529 |
| |
Dimensions (H x W x D in horizontal cabinet orientation) |
485 x 810 x 478 mm
(19.1 x 31.9 x 18.8 in) |
| |
Net Weight |
28.3 kg (62.5 lb) |
