Specifications

• Frequency Range (-10 dB): 40 Hz - 4.2 kHz
• Frequency Response (+/-3 dB): 47 Hz - 3.0 kHz
• Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
• Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
• Maximum SPL: 50 Hz -125 Hz: 127 dB-SPL cont avg
• (133 dB peak)
• 125 Hz - 800 Hz: 126 dB-SPL cont avg
• (132 dB peak)
• System Sensitivity
• (dB-SPL, 1W @ 1m): 50 Hz - 125 Hz: 97 dB
• 125 Hz - 800 Hz: 97 dB
• Nominal Impedance: 8 ohms
• Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
• Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
• Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
• Finish: Black DuraFlex finish.
• White available upon request.
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
• Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
• Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
• Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
• (21.6 x 22.1 x 25.9 in)
• Net Weight: 25.9 kg (57 lb)
• Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.