Specifications

• Frequency Range
• (-10 dB): 20 Hz - 1 kHz
• Frequency Response
• (+/- 3 dB): 25 Hz - 1 kHz
• Transducer Power Rating: 4000 W (16000 W peak), 2 hrs.
• Input Modes: Drivers Parallel / Drivers Discrete
• Long-Term System Power Rating: 2400 W (9600 W peak), 100 hrs.
• Maximum SPL (1m): 25 Hz - 200 Hz: 135 dB-SPL
• cont avg. (141 dB peak)
• System Sensitivity: 25 Hz - 200 Hz: 99 dB-SPL,
• 1W (2.0V) @ 1m
• Nominal Impedance: 4 ohms in parallel-drive mode
• 2 x 8 ohms in discrete-drive mode
• Low Frequency Driver: 2 x 2269H, 460 mm (18 in) dia.,
• 100 mm (4 in) Dual Coil Dual
• Gap neodymium Differential Drive, VGC drivers
• Enclosure: Rectangular cabinet, 16 mm (5/8 in)
• exterior grade 11-ply birch plywood
• Suspension Attachment: 16 points (4 top, 4 bottom, 4 each side)
• M10 threaded hardware
• Finish: Black DuraFlex finish.
• White available upon request.
• Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
• Input Connector: NL4 Neutrik Speakon and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
• Environmental Specifications: Mil-Std 810; IP-x3 per IEC529.
• Dimensions (H x W x D in
• vertical cabinet orientation): 1092 x 560 x 815 mm
• (43.0 x 22.0 x 32.1 in)
• Net Weight: 71.9 kg (158.5 lb)
• Optional Accessories: M10 x 35 mm forged shoulder
• eyebolts with washers.