Specifications

• Frequency Range : 34 Hz to 20 kHz (-10 dB)
• Frequency Response : 43 Hz to 18 kHz ( +/- 3 dB)
• Coverage Pattern : 60x 40
• rotatable waveguide
• Directivity Factor (Q) : 15.85
• Directivity Index (DI) : 12 dB
• Maximum Peak Output1 : 138 dB SPL 1m
• Transducer Section :
• Low Frequency Section : JBL 2265G, 381 mm (15 in) dia.,76 mm (3 in) Dual Coil neodymium Differential Drive, Direct Cooled
• Bandpass Nominal Impedance : 4 ohms
• Mid/High Frequency Section :
• Mid Frequency : JBL CMCD-82H, 200mm (8in) Dual Coil Differential transducer
• High Frequency : JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit
• Waveguide : JBL PT-K64-MHF
• Bandpass Nominal Impedance : 8 ohms
• System :
• DP2 Internal Amplification Output (at nominal load) : 2200 Watts Peak,
• 1100 Watts Continuous
• DP2 Output (Continuous IEC shaped pink noise into rated load impedance) : 750LF/350HF Watts
• DP2 Output Section : 2-Channel, Class I
• Audio Input connector : XLR with loop-through
• Network Control Connector : Ethernet, RJ45
• Signal Processing : DSP Based, resident in Input Module
• System Management : DSP based limiters for mechanical and thermal protection
• AC Power Operating Range : Auto Select 90-132VAC/216-264VAC, 50/60Hz
• AC Line Voltage : 50/60 Hz, Auto-Detect; 120V/240V (-15%, +10%)
• AC Input Connector : Neutrik PowerCon
• AC Loop-Thru : Neutrik PowerCon
• AC Current Requirement : 6A per system at 120V, 3A per system at 240V
• Enclosure :
• Box Construction : 5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex finish.
• Suspension System : 6 standard air-cargo 3 in. track and 12 M10 fittings
• Grille : 14 Gauge Black powder-coated perforated steel with foam backing
• Dimensions (H x W x D) : 914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in)
• Net Weight : 44 kg (97 lb)