The CLWI-KPLEX-BATT is a companion keypad for CLWI dimmers and switches, sharing the exact same aesthetics. Battery-powered and featuring wireless infiNET EX® communications, the CLWI-KPLEX-BATT is suitable for discreet installation in any space.
Faceplates for keypads sold separately.

Key Features

• Versatile, on-wall keypad for control of lighting and audio
• Sticks onto any surface using preinstalled double-sided tape
• Wireless infiNET EX® communications
• Battery-powered
• Field-replaceable, engravable buttons
• Customizable button layout
• Available in white and anthracite finishes

• Wireless
  	RF Transceiver	infiNET EX® 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
  	Range (typical)	150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities[1]
  	Gateway	Requires an infiNET EX gateway[2]
  Buttons
  	Configurable for 1 rocker (up/down), or any combination of up to 2 small rockers and/or 2 three-button pad; maximum layout contains 6 buttons; each press configurable for up to 3 discrete functions via single click, double click and hold; programmable via control system
  Power Requirements
  	CR2450, 3V Lithium Coin Cell Battery, 40 mA
  Environmental
  	Temperature	32° to 104°F (0° to 40°C)
  	Humidity	10% to 90% RH (non-condensing)
  Enclosure
  	Surface mountable, no enclosure required; Requires a FP-INTENSE or FP-PURE style faceplate or a CLWIA-FP-1G-ANTH or CLWIA-FP-1G-W style faceplate (all sold separately)
  Dimensions
  	Height	2.85 in (73 mm)
  	Width	2.85 in (73 mm)
  	Depth	0.76 in (20 mm) including front face w/ buttons
  Weight
  	2 oz (55 g)