Mounts in a Crestron® FlipTop™ to enable the installation of cable retractors.NOTE: Not required for FlipTop 600 Series.

These mounting brackets are designed for use with Crestron® FlipTops™ and Cable Retractors. A single bracket accommodates up to three or four cable retractors depending on the FlipTop™ model (see specifications for quantity and compatibility). Spacer inserts are available to fill any unused cable retractor spaces.^[1]

Note: 600 Series FlipTops do not require these brackets.

Each CBLRA-BRKT-FT model is designed for mounting the cable retractors in a vertical orientation. In this orientation, the retractors hang from the bottom of the FlipTop box allowing them to be hidden in a pedestal leg or similar space directly beneath the FlipTop.

Horizontal orientation is also possible by adding the CBLRA-BRKT-H Horizontal Mounting Option^[2]. Using this option, the cable retractors can be attached to the underside of the tabletop.

Please refer to the CBLR Cable Retractors spec sheet for additional information.