Half-rack stereo transmitter in a full-metal housing with OLED display for full control delivering clarity along the whole frequency spectrum for daily use on stage with evolution wireless G4 In Ear Monitoring systems.

Key Features

• Half-rack stereo transmitter in a full-metal housing with OLED display for full control

• Easy and flexible wireless synchronization between transmitter and receiver via infrared

• Compatible with Sennheiser WSM control software for flexible frequency allocation

• Up to 16 compatible channels

• Up to 42 MHz bandwidth with 1680 selectable frequencies, fully tunable in a stable UHF range

• Transmission Range: up to 100 meters / 300 feet

• High RF output power (up to 50 mW) depending on country regulations

• Compatible with wireless speaker system LSP 500 PRO

Specifications

• Frequency range

  A: 516 - 558 MHz

• Dimensions

  Approx. 202 x 212 x 43 mm

• Compander

  Sennheiser HDX

• THD, total harmonic distortion

  <0.9 %

• Weight

  Approx. 980 g

• Audio input

  2x XLR-3/¼" (6.3 mm) jack combo socket, electronically balanced

• Audio output

  ¼" (6.3 mm) stereo jack socket, balanced

• Signal-to-noise ratio

  >90 dB

• RF output power

  switchable: Low: typ. 10 mW, Standard: typ. 30 mW, High: typ. 50 mW

• Switching bandwidth

  up to 42 MHz

• Peak deviation

  ±48 kHz

• Nominal deviation

  ±24 kHz

• Modulation

  Wideband FM stereo (MPX pilot tone)

• Power supply

  12 V DC

• Current consumption

  max. 350 mA

• Max. Input voltage

  +22 dBu

• Transmission frequency

  Max. 1680 frequencies, adjustable in 25 kHz steps 20 frequency banks, each with up to 16 factory-preset channels, no intermodulation 6 frequency banks with up to 16 programmable channels

• AF frequency response

  25 Hz to 15 kHz

• Temperature Range

  -10 °C to +55 °C

• Frequency stability

  ±10 ppm

• Antenna Output

  BNC socket, 50 Ω

  What's in the Box

  • SR IEM G4 stereo transmitter
  • rod antenna
  • power supply
  • GA 3 rackmount set
  • quick guide
  • safety guide
  • manufacturer declaration sheet