- Advanced technology components:Differential Drive, neodymium magnet, dual voice coil, Direct Cooled™ cone transducers for low weight and high output
- JBL DrivePack® technology delivers superb audio quality and robust high efficiency “Class-I” power, perfectly matched to the enclosure, with comprehensive onboard digital signal processing
- Modular input bay provides choice of analog or digital audio input options, with networked control and monitoring capabilities
- World-wide AC line voltages are automatically selected for 50 or 60 Hz.
- Advanced construction techniques using PlyMax™ provide exceptionally rigid, lightweight enclosure construction.
- Integrated S.A.F.E.™ suspension system: premium heat-treated alloys provide rigid, reliable hanging arrays
- For use in stand-alone arrays or in combination with other VERTEC system models
Specifications:
Line Array Element
Frequency Response (±3 dB): 67 Hz – 20 kHz
Frequency Range (-10 dB): 55 Hz – 22 kHz
Horizontal Coverage Angle (-6 dB): 100 deg. nominal (500 Hz – 16 kHz)
Vertical Coverage
Angle (-6 dB): Varies with array size and configuration
Maximum Peak Output
1
: 136 dB SPL, 1m
Transducer Sections
Low Fr
equency:
Two 2168H-1, 203 mm (8 in) dia., 76 mm (3 in) Dual Coil,
Differential Drive
®
, Direct Cooled
Bandpass Nominal Impedance: 4 ohms (LF woofers wired in parallel)
Mid & High Fr
equency:
MID: Four 2104H 101 mm (4 in) with 25.4 mm (1 in) dia. voice coil
HF: Two JBL 2408H 25 mm (1 in) exit compression drive, 38 mm
(1.5 in) voice coil
Bandpass Nominal Impedance: 8 ohms (drivers wired in series-parallel)
System
DP2 Internal Amplification
Output (at load): 2200W Peak, 1100W Continuous
DP2 Output Topology: 2-Channel, Class-I
Signal Processing: dbx Type IV Conversion System, Precision bandpass filters,
limiting, pre-equalization filters and automatic self-test functions
System Management: DSP based limiters for mechanical and thermal protection
Signal Input: F-XLR Active 20K Ohms Balanced, 10K Ohms Unbalanced
Signal Loop-Through: M-XLR (passive pass-through)
Controls: Precision 0.5 dB increment Detented 16 dB input attenuator
AC Power Operating Range: Auto Select 90-132/VAC 50/60 Hz
AC Line Voltage: 50/60 Hz, Auto-Detect; 120V/240V (±10%)
AC Input Connector: Neutrik Powercon
AC Power Loop-thru: Neutrik PowerCon
AC Current Requirement: 4A per system at 120V, 3A per system at 240V
Enclosure
Box Construction: Wedge frustum 5 degree side angle enclosure. PlyMax™
engineered composite structure, DuraFlex finish, 2 handles
Suspension System: S.A.F.E. hardware, integral hinge bars nest in rigging tubes on box
ends. Quick release pins with restraining lanyards
Grille: Black perforated steel, foam backed
Dimensions (W x H x D): 787 mm X 279 mm X 563 mm
(31 in X 11 in X 22.1 in)
Net Weight: 39.7 kg (87.5 lb)
