|
|
|
|
ပုံမှန် စျေးနှုန်း
MMK 975,600
အသင်းဝင် စျေးနှုန်း
MMK 932,400
| Frequency Response (-10dB) | 55 Hz – 18 kHz | |
| Power Rating | 160 W Continuous Program (2 hrs) 80 W (320W peak), Continuous Pink Noise (2 hrs) 45 W (180W peak) Continuous Pink Noise (100 hrs) |
|
| Transformer Taps | 70V: 30W, 15W, 7.5W & 3.8W 100V: 30W, 15W, 7.5W |
|
| Frequency Response (±3 dB) | 65Hz - 16 kHz | |
| Maximum Input Voltage | 23.3 V | |
| Sensitivity | 86 dB, 1W @ 1m (ave. 80Hz - 16kHz) | |
| Nominal Coverage Angle | 360° horizontal, 160° vertical (primary listening 10° to 50° up from ground). | |
| Directivity (Q) | 2.2 | |
| Directivity Index (DI) | 3.4 dB | |
| Maximum SPL | 105 dB @ 1m | |
| Nominal Impedance | 8Ω (at 8Ω setting) | |
| Insertion Loss | <1.0 dB at any tap setting | |
| Thru Setting | 8Ω nominal | |
| Crossover Type | 2nd Order LPF on LF and 2nd Order HPF on HF | |
| Recommended Protective High-Pass | 65 Hz for 8Ω operation, 24 dB/oct 60 Hz for 30W tap, 24 dB/oct 50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct |
|
| Low Frequency Driver | 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in) voice coil, polypropylene cone and polyurethane surround. | |
| High Frequency | 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome. | |
| Enclosure Material | LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rated. | |
| Grille | Powder coated stainless steel. | |
| Environmental | IP-55 rating per IEC529 (dust protected and protected against jets of water). Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-202F for salt spray. Enclosure UL94V0 rated. | |
| Agency Ratings | UL1480, Transformer UL Recognized per UL1876, ROHS compliant. | |
| Terminals | Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section). | |
| Wiring | Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided locations) and one between the bottom base and top speaker sections. Included gland nuts require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS). | |
| Colors | Hunter Green, RAL6018 | |
| Dimensions (H x W x D) | 432 x 291 x 291mm (17 x 11.5 x 11.5 in.) | |
| Net Weight | 5.5 kg (12 lb) | |
| Shipping Weight | 7.3 kg (16 lb) | |
| Included Accessories | (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver | |
| Installer-Supplied Required Tools | 22mm (0.875 in, 7/8 in) twist-type drill bit (or other type suitable for plastic) for installing gland nut into enclosure. |